News
-
CA6150 MANUAL LATHE MACHINE
Feature: It can be used for turning cylindrical and conical surfaces, end faces and inner holes, as well as a variety of metric and inch threads. 1. Spindle: through the diameter of 52MM, in line with the international standard ISO-C6; expand the scope of shaft processin...Read more -
CK61125 CNC LATHE MACHINE
Item Unit CK61125 Max. swing over bed mm 1250 Width of bed guide rail mm 1100 Max. processing length mm 5000 Max. swing dia. over cross slide mm 900 Chuck diameter mm Φ1000;4 jaw;manual, hollow spindle bore mm 130mm Main shaft gears Manual gear change Spi...Read more -
CK61100 heavy metal machine cnc retrofit horizontal lathe
1. High machine precision, the system set the minimum unit 0.001mm, X-axis repeat positioning accuracy of 0.010mm, Z-axis repeat positioning accuracy of 0.012mm. 2. High hardness, good rigidity, high audio quenching, machine guide rails and saddle rails are using special...Read more -
Feature of this CK0640 cnc lathe machine
Feature of this CK0640 cnc lathe machine: 1. The casting adopts resin sand technology, which has good abrasion resistance, and the hardness of the guide rail after fine grinding is more than 52°. 2. The straight-line tool post has high working efficiency, and the precision ball screw pair is more...Read more -
The characteristics of CNC lathe CK6160
CK6160 China factory price horizontal metal fanuc cnc turning lathe with bar feeder is characterized by high technical content, rigidity, precision and stability, energy efficient, high power. It is widely used in wind power, petroleum, chemical, papermaking, textile, m...Read more -
Common faults of CNC machine tools and their classification
1. Classification by fault location 1. Host failure The host of a CNC machine tool usually refers to the mechanical, lubrication, cooling, chip removal, hydraulic, pneumatic and protection parts that make up the CNC machine tool. The common faults of the host mainly incl...Read more -
The working principle and characteristics of the lathe CNC system
The CNC system of the lathe is composed of CNC unit, stepping servo drive unit and deceleration stepper motor. The CNC unit adopts MGS--51 single-chip microcomputer. The control program of the CNC unit is the core of realizing vari...Read more -
Metal band sawing machine
Item GT4240 rotary angle band sawing machine GT4240 rotary angle (gantry) band sawing machine Max.sawing size(mm) 0 °400, 45° 310, 60° 210 saw blade size(mm) 1960X34X1.1 5160X34X1.1 Saw blade speed(m/min) 27X45X69 Saw wheel diameter(mm) 520 speed of feed stepless Main motor...Read more -
HMC1814 horizontal machining center
Main technical parameters of HMC1814 horizontal machining center Description Unit Specification of 1814 Worktable size mm 2000×900/800*800 rotary table Max loading weight on worktable kg 1600 T-slot(pieces-width-distance) mm/piece 5-22-165 X axis trav...Read more -
HMC1395 horizontal machining center
Main technical parameters of HMC1395 horizontal machining center Description Unit Specification of HMC1395 Worktable size mm 1400×700/630×630 rotary table Max loading weight on worktable kg 1000 T-slot(pieces-width-distance) mm/piece 5-18-130 X axis ...Read more -
HMC1290 horizontal machining center main technical parameters
Description Unit Specification of HMC1290 Worktable size mm 1360×700/630*630 rotary table Max loading weight on worktable kg 1000 T-slot(pieces-width-distance) mm/piece 5-18-122 X axis travel mm 1200 Y axis travel mm 800/600 Z axis travel mm 700 ...Read more -
HMC1075 Horizontal machining center
specifications HMC1075 Worktable size (mm) 1300×600 Max loading weight on worktable (kg) 800 T slot size (Mm/ piece) 5-18-105 X axis maximum t...Read more