The CW6180 lathe has high power, strong rigidity and wide spindle speed range. It is suitable for powerful or high-speed cutting. It can turn end faces, outer circles, meat holes, and metric, inch, modulus, and diametral threads. It can also bear drilling, Nesting, boring and other processes. The main shaft’s braking and positive and negative changes are hydraulically controlled, the braking is sensitive and reliable, and the button can be used to change the first-level speed without stopping. The head box is lubricated with pressure oil, and the spindle speed range has several types for users to choose. There is a safety mechanism in the slide box to prevent damage to the lathe due to overload. The upper tool post can cut short cones by motor, and the compound movement of longitudinal feed and upper tool post feed can cut long cones by motor. The bed rails are surface-hardened to improve the service life of the rails. The control handles of the lathe are centralized, which is convenient and flexible to use.
| Item | Unit | CW6180 |
| Swing over bed | Mm | 800 |
| Swing over cross slide | Mm | 520 |
| Max Workpiece length | mm | 1500/3000/4000 |
| maximum turning length | mm | 3885 |
| Spindle bore | mm | Φ105 |
| Taper of spindle | metric 120# | |
| taper of center | MT6 | |
| number of speed and speed range | r/min | 18、7.5-1000 |
| Range of feed speeds | 64/64 | |
| Rapid feed rate of bed saddle | mm/min | 4000 |
| lower slide maximum cross stroke | Mm | 390 |
| top rest maximum stroke | Mm | 200 |
| Dia.of tailstock sleeve | Mm | Φ100 |
| Stroke of tailstock sleeve | Mm | 250 |
| Tailstock Quill taper hole | MT5 | |
| Main motor power | Kw | 11 |
| Fast motor power | Kw | 1.1 |
| Wedth of the bed | Mm | 550 |
| Machine size | Mm | 6160*1500*1575 |
| Machine weight | Kg | 5700 |
Features of this manual lathe machine :
This lathe is mainly used for turning inner and outer cylindrical surfaces, conical surfaces and other rotating parts. It can process various common metric, inch, modulus and diameter pitch threads, and can broach oil grooves and keyways.
1. The bed adopts a large-width side wall double rib plate, and the inner front plate adopts a box-shaped and diagonal rib combination structure. The overall rigidity is one-third higher than that of the single-wall door-shaped rib structure.
2. The operation is centralized, and the slide is equipped with a fast-moving mechanism, which is visually operated with a single handle; the main shaft forward and reverse conversion and the brake are hydraulically controlled.
3. The lathe has high structural rigidity and transmission rigidity, with stable precision and strong cutting capability.
4. The sliding surface of the bed guide rail adopts the TSF wear-resistant inlay structure, which is light and flexible in movement and has a long service life; the lubrication system is circulated outside the box, which improves the processing accuracy.
5.The spindle hole is large, which can pass 4″ bar material; the tailstock is equipped with a dial and an intuitive marking; the machine tool has a neat and beautiful appearance, and is easy to wipe and maintain.
Post time: Mar-21-2022