1. High machine precision, the system set the minimum unit 0.001mm, X-axis repeat positioning accuracy of 0.010mm, Z-axis repeat positioning accuracy of 0.012mm.
2. High hardness, good rigidity, high audio quenching, machine guide rails and saddle rails are using special materials, hard rail, high frequency quenching, super hard wear and tear, durable, good processing accuracy to maintain good.
3. High stability, high-strength cast iron machine, adding copper and chromium special materials, bed rail quenching depth of 4mm hardness of 52 °or more, effectively improve the machine wear resistance and stability.
4. Centralized automatic lubrication guide, screw, etc., with a flexible movement to reduce the heat distortion, precision and stability characteristics.
5. Low machine noise, the machine gear with precision grinding, effectively improve the gear hardness, reducing machine noise.
6. Tool holder with high positioning accuracy, high precision CNC turret, tool change knife, no contact to send the message, against the sales, the use of international advanced three-pole tooth fine positioning, thread lifting tightening. Optional six-station or eight-station horizontal electric knife, turret with high positioning accuracy, high strength, good seismic performance and so on.
CK61100 | |||
Processing | Max. swing over bed (mm) | mm | Φ1000 |
Max. swing dia. over cross slide(mm) | Φ630 | ||
Max.processing length(mm) | mm | 1000/1500/2000/3000 | |
Max.processingdiameter | mm | Φ1000 | |
maximum diameter of bar | mm | Φ630 | |
chuck | 630 3jaw or 800 4 jaw | ||
SPINDLE | The spindle terminal structure | D11 | |
Diameter of spindle bore (mm) | mm | Φ105 | |
The taper of spindle front-end | 1:20 | ||
Spindle speeds series | Four files manually/Hydraulic four files | ||
Spindle speeds | r/min | 30-84/53-150/125-350/300-835 | |
FEED | X/Z axis travel | mm | 350/(1000/1500/2000/3000) |
X/Z axis lead screw diameter × pitch | mm | φ3208/φ5010 | |
X/Z fast moving | m/min | 4月6日 | |
TOOL | Tool post form | Electric vertical | |
number of work position | 4 | ||
:Tool specification: turning/boring | mm | 32/40 | |
TAIL STOCK | Sleeve diameter / stroke | mm | Φ100/250 |
Sleeve inside the hole taper | MT6 | ||
Sleeve driven form | manual | ||
Tailstock body movement form | Manual | ||
MOTOR | main motor | Kw | 11 |
Spindle motor torque | NM | 48 | |
Motor of Z axis X | Kw | 1.5/2.3 | |
X/Z Nm | NM | 10月15日 | |
Coolant motor power | W | 125 | |
power capacity | KVA | 15 | |
OTHE | |||
Bed saddle layout | Flat bed | ||
Guide form | Harden guide way(>HRC50) | ||
Machine weight | kg | 4300/4700/5500/6500 | |
length × width × height | mm | ( 3400/3900/4400/5400 ) | |
/1900/2000 |
Post time: Sep-16-2022